Newsletter Instagram YouTube Pinterest Facebook

"Welcome Spring" Sign with Butterflies

Patio Paint Outdoor™

share Facebook Pinterest Twitter

"Welcome Spring" Sign with Butterflies

designed by Katie Blevins

Welcome spring with this distressed outdoor sign featuring Patio Paint Outdoor™.

See more projects using this product.
Learn more about Patio Paint Outdoor™.

SUPPLIES

Americana® Acrylics

  • White (Writer) (DAW01)

DecoArt Media® Antiquing Cream

  • Carbon Black (DMM150)

Patio Paint Outdoor™

  • Cloud White (DCP14)
  • Desert Turquoise (DCP79)
  • Marigold (DCP57)
  • Pumpkin (DCP52)
  • Sweet Pea (DCP59)

Primers, Sealers, and Finishes

  • Americana® Matte Spray Finish (DAS13)

Other supplies

  • stylus or pencil
  • sandpaper
  • scissors
  • saw
  • stencil brush
  • large flat brush
  • black fine-point permanent marker
  • cutting mat
  • craft knife
  • drill and small drill bit
  • small nail and hammer
  • drawer knobs
  • wood boards (same thickness)
  • aluminum foil

INSTRUCTIONS

NOTE: Let dry completely between painting steps.

  1. Cut eight boards of the same thickness into various widths and lengths to create a total area approximately 19” x 20”. (One board should be at 2-3/4” to accommodate the drawer knobs.) Cut two strips of wood 1/2" x 17". Sand all surface thoroughly.
  2. Apply white to the front and sides of each wooden piece, allowing the wood grain to show through. Arrange the planks as desired, making sure the bottom piece is at least 2-3/4” in width.
  3. Nail the two 1/2”x 17” strips on the back of the planks to secure them.
  4. Print out the flowers and words pattern and cut out the elements with a craft knife. Save the letters and flower centers and put aside. Trim the design, leaving about a 1/2” halo.
  5. Place the stencil as desired. Stencil in with blue, yellow, orange, and green as desired with a stencil brush. Add several dots to the center of each flower with a dimensional white writer. Let dry. Once dry, outline each element with a permanent marker.
  6. Print off the butterfly pattern and adhere onto aluminum foil. Place onto a softer surface (such as a cutting mat) and trace the outlines of butterfly with ballpoint pen. Cut out with scissors.
  7. Apply a coat of black antiquing cream to the butterflies with a soft brush.
  8. Fold the butterfly wings up and nail each one to the sign with small nails.
  9. Drill holes for the drawer knobs and insert into the lower plank.