three craft basswood pieces (1/16" x 4" x 9"; 1/8" x 2" x 6"; and 1/8" x 2" x 3-1/2")
two craft balsa wood pieces (1/8" x 1" x 17-1/2" and 1/8" x 1" x 9")
4" x 2" foam disc floral arranger
decorative moss
INSTRUCTIONS
Apply two coats of Cloud White with the 1" sponge brush to each of the two balsa wood pieces. Set aside.
With painter's or masking tape, tape a 3/8" border around the outside of the large basswood piece and a 1/4" border around the other two basswood pieces. Paint the remaining areas of all the pieces Wrought Iron Black. Apply additional coat if necessary and allow to dry.
Paint the terra cotta pot Wrought Iron Black with the sponge brush. Set aside to dry.
Remove the tape from the large basswood sign piece and paint the exposed wood Marigold. Use additional coats as desired.
Remove the tape from the two small basswood sign pieces and paint the exposed wood Sunshine Yellow. Use additional coats as desired.
Paint "Welcome", "Ceremony", arrow, and initials of the bridal couple on the signs using Cloud White.
Glue the signs to Cloud White stakes using liquid glue. Place a floral arranger disc into the pot and cover with moss. Push the signs into the floral arranger disc.