Instagram YouTube Pinterest Facebook

Rainbow Stones Water Marbling I

Water Marbling

Rainbow Stones Water Marbling I
Love it? Share it! Pinterest

Rainbow Stones Water Marbling I

designed by crimson duvall

Use the Over the Rainbow Water Marbling Set to create your own unique stones patterns.

See more projects using this product.
Learn more about Water Marbling.

SUPPLIES

Water Marbling

  • Magic Medium Water Prep (DWM100-36)
  • Over The Rainbow Water Marbling Set (BD7WMOTR)
  • Premium Marbling Paper (20pcs) (DAS277-K)
  • Speciality Marbling Sticks (20pc) (DABK50-K)
  • Water Marbling Premium Cleaning Paper (32pcs) (DAS278-K)

Other supplies

  • palette or plastic plate (or any clean surface to put a small amount of paint on)
  • paper towels
  • iron
  • watercolor paper
  • plastic tub or tray (with lid for mixing size)
  • tray for rinsing

INSTRUCTIONS

NOTES: Before you begin be sure to set up your water marbling station. You should have your supplies set up and easily accessible. Following directions on bottle, mix the Magic Medium Water Prep with the appropriate amount of water in the water marbling tray or separate container. You should also have a tray of clean water to rinse your prints after they are dipped. (TIP: Lay out paper towels to place your fresh prints on to speed drying time.) Plan to create several unique prints at one time. Some of the drops of paint will sink and you may begin to see drops of paint gathering on the bottom of the tray, this is normal and will not effect the surface where the print is pulled. To achieve the Stones pattern, the surface of the size will be covered with multiple, circles of paint color. For this project use the Crystal Geode Water Marbling Set, which includes the following colors: Red, Orange, Yellow, Green, Tropical Blue, Blue and Violet.

  1. Prepare your size. Follow the easy instructions on the Magic Medium bottle to prepare the size (water) mixture. (TIP: Prepare mixture in a plastic tub with a lid and fill/refill the water marbling tray as needed. Cover unused size and store at room temperature to keep it fresh for up to five days) Now you are ready to add paint.
    Step 0 Example
  2. Start by filling the surface of the size with an even coat of Tropical Blue. Do this by pouring paint down the middle of the tray horizontally.
    Step 1 Example
  3. Add another line of paint. Allow paint to disperse before adding next line of paint.
    Step 2 Example
  4. Keep adding lines of Tropical Blue paint until the surface is uniform in color.
    Step 3 Example
  5. To create the "Stone" pattern, drip the paint out of the bottle directly onto the size surface.
    Step 4 Example
  6. Add as many drops of red paint as you like. As shown here, I added eight drops of red in a random pattern.
    Step 5 Example
  7. To begin building the color intensity, add another drop of Red to each "stone".
    Step 6 Example
  8. Next, in the center of the red stone, add two drops of Orange paint, allowing each drop to disperse before adding the second drop.
    Step 7 Example
  9. Next, add two drops of Yellow to the center of each stone.
    Step 8 Example
  10. Allow the Yellow paint to disperse and then add Green paint drops to the center of each stone.
    Step 9 Example
  11. Allow the Green paint to dissolve.
    Step 10 Example
  12. Add one drop of Tropical Blue to each stone and allow to dissolve.
    Step 11 Example
  13. Then add another drop of Tropical Blue to each stone.
    Step 12 Example
  14. Study your design. At this stage you may be pleased with the overall effect. If so, move to the transfer instructions. Remember, whenever you see something you like, transfer it onto your paper!
    Step 13 Example
  15. If you would prefer to keep building color, add two drops of Blue to each stone and then two drops of Violet.
    Step 14 Example
  16. To make smaller stones, squeeze out a small amount of red paint onto a clean surface.
    Step 15 Example
  17. Dip the tip of the Water Marbling Stick into the paint puddle.
    Step 16 Example
  18. Gently dip the tip of the Marbling Stick into the center of each Stone.
    Step 17 Example
  19. Repeat if you want to create a larger red stone.
    Step 18 Example
  20. Your design is ready to take a print.
    Step 19 Example
  21. When your tray is ready to transfer the design onto the paper, use a piece of DecoArt's Premium Water Marbling Paper to get maximum absorbency of the paint. (TIP: Keep paper very dry! If the surface is wet prior to dipping into the size, it won't absorb the paint, which will result in a white spot.) A good technique to minimize bubbles in your print is to hold your paper on opposing corners to allow the center of the paper to touch the surface first. Then, slowly lay your corners down onto the surface. Make sure the paper is in full contact with the surface.
    Step 20 Example
  22. Allow the paper to float on the surface of the size for a moment. This allows the design to transfer onto the paper. The corners of the paper will begin to pull away from the surface. Lift the paper off the surface by lifting opposing corners of the paper. Although you may notice some slight finger smudges in the corners of the paper, do not be concerned. They simply add to the overall effect.
    Step 21 Example
  23. Place print face down in a clean tray of water to rinse off extra sizing. This step is optional, but rinsing off extra sizing allows for cleaner, more vibrant colors to shine through! Also, the paper will be less stiff and dry flatter.
    Step 22 Example
  24. Drain excess water off of the surface.
    Step 23 Example
  25. Lay paper, print side up on a paper towel to dry. This step will help absorb excess moisture and allow prints to dry faster.
    Step 24 Example
  26. There will be extra paint left on the surface. You can transfer another print at this point. (TIP: blow on the surface to give the paint more movement and interest.) The pool of sizing can be reused again and again. To prepare the pool for a new project, simply use DecoArt's Water Marbling Premium Cleaning Paper and drag it across the surface until clean.
    Step 25 Example
  27. (TIP: Remember, just the surface has to be clean to reuse. There may still be paint that has fallen to the bottom. This is called "sinking". This will not affect further prints!)
    Step 26 Example
  28. Allow print to dry completely. Lay paper, print side down and using an iron on high, iron to flatten. (TIP: Place a piece of watercolor paper between the paint and the table surface to protect the print. If you have steam, place a paper towel between the watercolor paper and the table.)
    Step 27 Example
  29. The print looks beautiful in a simple frame. But there are endless possibilities as to how you can use these one-of-a-kind prints. Incorporate them in a collage, cover a journal, or even as a background for a mixed media project.
    Step 28 Example
  30. Try using DecoArt's Water Marbling Surface prep and techniques to hydro-dip a scarf, a pair of shoes or anything you want to try!
    Step 29 Example