Hand Built Entry Table
Posted by DecoArt on Jun 20th 2017
Dress up an entryway with this table cloaked in Americana Decor® Chalky Finish paint.
SUPPLIES
- sandpaper
- paintbrush
- pencil
- screwdriver
- wood glue
- wood filler
- drawer pull
- stencil
- jigsaw
- plywood
- nail gun
- drill and drill bits
- wood
- support brackets
INSTRUCTIONS
- Build the table according to the attached plans. Make sure the wood surface is clean and dry.
- Paint everything except the top of the table using Lace. Let dry. Apply a second coat, if desired.
- Paint the sides and top of the table using Inheritance. Let dry.
- Stencil the tabletop with the desired stencil pattern using Lace. (We used a herringbone stencil.) Let dry.
- Once the paint is dry to the touch, lay down the opposite side of the stencil and paint inside the stencil areas using Lace.
- Continue until you reach the end of the tabletop. Let dry.
- Using sandpaper, sand down all the painted areas to distress. Wax all the painted areas using a Clear Crème Wax.
- Remove the drawers (mark so you know which one goes in which space) and mark for the drawer pulls using a pencil. Measure again, just to be sure.
- Pre-drill holes for the drawer pulls.
- Attach the drawer pulls using a screwdriver.
- Attach the tabletop and return the drawers to their spaces.