Newsletter Instagram YouTube Pinterest Facebook
BOP Logo
Before you buy, DIY! Our DIY projects will inspire you to take a new look at items you might already own or that you spot at the local flea market. Whether you are an expert or just starting out, this collection of DIY tutorials will have you feeling empowered to tackle your own projects in no time. Make sure you share your creations with us using #decoartprojects for a chance to be featured.

DIY Oversized Wood Lanterns

By: Thrifty and Chic
April 3, 2019

print Facebook Pinterest DIY Oversized Wood Lanterns Pinnable Image
DIY Oversized Wood Lanterns
Pinterest Logo

Spring is here; now if the warmer weather will only make its way! I am getting all amped up and ready for those 70-degree temps. In preparation, I'm adding some great new additions to my patio and porch. I've been wanting to make some over-sized lanterns for quite some time for my porch. I think lanterns just add that extra something to outdoor areas. 

Today, I'll be sharing with you a tutorial on how to make one of these, in three varying sizes.

Items needed:

  • Americana Decor Outdoor Living 8oz - Picket Fence
  • Americana Decor Outdoor Living 8oz - Wildflower
  • Americana Decor Outdoor Living 8oz - Frosted Glass
  • Americana Decor Stencils - Mediterranean Tile
  • Wood glue and/or 1 1/4 inch brad nails and nail gun
  • Jute
  • Staple gun

Instructions:

Instruction #1 - IMG 8911edit
Pinterest Logo

I built the largest lantern first, so here are the sizes for it:

Instruction #2 - IMG 8704edit
Pinterest Logo

For the smaller lanterns, I ended up using 3/4" square dowels at 14" for the medium and 11" for the small. Both the bases and top on these are from 1x8s. I made those square. My 1x8 was actually 7". So, the top and bottom were 7"x7" for both the medium and smaller lantern. Depending on the actual size of the 1x10 for the large lantern, and the 1x8 for the others will determine the actual size you need to cut your 1x3s. As you go through this tutorial, just make sure you measure what wood you have and don't go entirely on my given measurements; just use them as a guide.

Step 1 (this tutorial is for the largest lantern. It will be similar for the smaller ones besides size and minus the 1x3s at the top): 
Secure the wood dowels to the corners of the 1x10. The easiest way to do this is to stand two dowels up vertical, place the 1x10 on top and then shimmy one of the dowels to one corner. Secure with wood glue and nails. Then do the next corners with the other dowels.

Instruction #4 - IMG 8706edit
Pinterest Logo

Step 2: Secure the next 1x10 to the wood dowels to all corners.

Instruction #5 - IMG 8715edit
Pinterest Logo

Step 3: Measure the distance between each dowel. Cut the 1x3's to that size. Reminder that each side might have a slightly different distance. Secure the 1x3s to the outside part of the wood dowels making sure they are flush on the outside.

Instruction #6 - IMG 8721edit
Pinterest Logo

Do the same to the top part against the other 1x10.

Instruction #7 - IMG 8726edit
Pinterest Logo

Step 4: Secure the 1x2s to the bottom of the lantern. Place each in a corner, glue and nail. 

Instruction #8 - IMG 8728edit
Pinterest Logo

Step 5: Now it's time for the top. First, place the 1x4 in the direct middle of the 1x10. Secure in place. Second, place the 1x3 on top of the 1x4, centered. Secure in place.

Instruction #9 - IMG 8740edit
Pinterest Logo

This finishes up the wood part of the lantern. It should look like this.

Instruction #10 - IMG 8750edit
Pinterest Logo

For the smaller lanterns, I decided not to put the 1x3s on top just because they are smaller and it took up too much visual space.

Instruction #11 - IMG 8763edit
Pinterest Logo

Step 6: Paint all the lanterns with Outdoor Living Picket Fence. This took about 2-3 coats for full coverage.

Instruction #12 - IMG 8786edit
Pinterest Logo

Step 7: Paint the inside bottom and top of each lantern. I chose Wildflower for my small sized one. This took two coats.

Instruction #13 - IMG 8828edit
Pinterest Logo
Instruction #14 - IMG 8797edit
Pinterest Logo

For the largest and medium-sized lantern, I chose Frosted Glass.

Instruction #15 - IMG 8836edit
Pinterest Logo
Instruction #16 - IMG 8801edit
Pinterest Logo

Step 8: Use the Mediterranean Tile stencil and add some embellishment. I chose to do the bottom corners of each 1x3.

Instruction #17 - IMG 8860edit
Pinterest Logo

And I also stenciled the top.

Instruction #18 - IMG 8793edit
Pinterest Logo

Step 9: Add the handles. Take three pieces of jute cut at about 10" each. Knot one end, braid, and then knot at the opposite end. 

Instruction #19 - IMG 8812edit
Pinterest Logo

 Secure the jute into the 1x4 using the staple gun.

Instruction #20 - IMG 8816edit
Pinterest Logo

 Here are the finished lanterns!  

Instruction #21 - IMG 8901edit
Pinterest Logo
Instruction #22 - IMG 8893edit
Pinterest Logo

These are great and big enough to add a lot of things in. Keep them empty, fill with faux flowers or potted flowers. You can even add some battery lit candles. 

Here's a good look at the colors from above. It's almost so pretty that you wouldn't want to add anything in them, which is what you want! Something that looks good on it's own, but totally works with additions. 

Instruction #23 - IMG 8951edit
Pinterest Logo

I chose to use the faux variety in my lanterns since we seriously just had snow 2 days ago. There's not much growing in terms of flowers in my neck of the woods right now...except that one in the back. That's seriously the only one at the store. 

Instruction #24 - IMG 8937edit
Pinterest Logo

The way that I see it, even though it's still snowing outside, warmer weather is on its way and it's definitely never too early to get started on all those outdoor projects! Plus, this is a great project that can be used for indoors too! 

To see more DIY projects on the weekly, visit me at my blog: www.thriftyandchic.com.  

Instruction #25 - IMG 8928edit
Pinterest Logo

Be sure to visit Thrifty and Chic  for more projects and to learn more about Alicia.

Comments

Did you build the chairs in the photos? If so do you offer the plans or instructions?

Beth

May 15, 2021

Leave a comment:

Join our Team

We're always looking for new creators to join our team. If you're interested, fill out our online application and read more about the features and benefits of the program. If you have any questions, shoot us an email!

Meet Our
Makers

Meet the members of our creator team and see how they've been using our products to create.