Newsletter Instagram YouTube Pinterest Facebook
BOP Logo
Looking to redecorate your home? Crafting for the holidays? Need a fun idea to do with the kids? We have craft ideas for all occasions and experience levels! From simple home decor projects to personalized giftable items, we are sure you will find projects that inspire. Be sure and share any projects you do with our products using #decoartprojects for a chance to be featured.

Media Liquid Glass Altered Art Jewelry Necklaces

By: Von Pappe II
October 20, 2015

print Facebook Pinterest
Media Liquid Glass Altered Art Jewelry Necklaces
Pinterest Logo

Are you a bit intimidated of resin (the one you have to mix and pour for creating jewelry pieces) too? Well, I have to admit that I am (and that I have been hoarding some for ages, not daring to break open the package because I am afraid I will mess up). But since I have discovered DecoArt Media Liquid Glass I don't need any Resin to create wonderful glossy and dimensional pendants for my altered art necklaces! And when did you last make paper beads? When you were a child? Well, let me tell you that it still is a lot of fun – especially when you take them to the next level and incorporate them with your own mixed media jewelry pieces!

Items needed:

  • DecoArt Media Fluid Acrylics - Cobalt Teal Hue
  • DecoArt Media Fluid Acrylics - Quinacridone Violet
  • DecoArt Media Fluid Acrylics - Raw Sienna
  • DecoArt Media Mediums and Specialty Products - Liquid Glass
  • DecoArt Media Mediums and Specialty Products - Clear Matte Medium
  • DecoArt Media Antiquing Creams - Patina Green
  • DecoArt Media Varnishes - Gloss Varnish
  • DecoArt Media Fluid Acrylics - Diarylide Yellow
  • Black 18 Gauge Wire
  • Cutting, Flat, and Round Nose Pliers
  • 3/4 in Thin Brass Disc
  • Dremel or Dress Press
  • Fine Metal Sanding Paper
  • Collage Paper
  • Assorted Brushes
  • Fine Tip Artist Pen
  • Old Book Pages or Magazines
  • Skewers
  • Scissors
  • 50in Gun Metal or Black Chain
  • 2 Necklace Closures
  • Jump Rings
  • Coloured Beads


Pendant One:
Drill punch two opposite holes in brass disc and sand on both sides

Instruction #1 - pendant1 step1
Pinterest Logo

Create a small collage that fits the disc's size.

Instruction #2 - pendant1 step2
Pinterest Logo

Use Matte Medium to layer the cut out elements and seal the finished collage. Let dry.

Instruction #3 - pendant1 step3
Pinterest Logo

To make sure your collage is glued to your brass disc properly hold against a light source so the shape of the disc shows through while the glue is still wet (so you can still move it around until it fits). Use Matte Medium for glueing the collage on. Let dry. Then cover the back of your pendant with some old book page in the same way. Seal with Matte Medium.

Instruction #4 - pendant1 step4
Pinterest Logo

Paint and doodle over your collage with lightly diluted fluid acrylic paints. As the fluid acrylics are translucent no detail of the collaged elements will get lost. Let dry.

Instruction #5 - pendant1 step5
Pinterest Logo

Apply a thin coat of Patina Green Antiquing Cream, let cure for some minutes and wipe back with a soft damp cloth until the desired look is achieved. Let dry.

Instruction #6 - pendant1 step6
Pinterest Logo

Draw some thin outlines with a permanent fine tip black pen and add some text cut from an old book page.

Instruction #7 - pendant1 step7
Pinterest Logo

Cover the finished pendant with a generous coat of Liquid Glass. Let best dry overnight so you don't risk touching it too soon and leaving marks or fingerprints.

Instruction #8 - pendant1 step8
Pinterest Logo

Pendant Two:
Bend an oval shape (bezel) from black wire that includes a loop on top and at the bottom. Make sure it is as flat as possible (you can use a hammer and a small wood tile to carefully flatten it out if necessary). Position your bezel on top of a designer paper or small collage and thoroughly fill up with Liquid Glass by covering the whole image and the wire frame as well! This way the Liquid Glass will fuse the image and your bezel once it is dry. Let best dry overnight so you don't risk getting fingerprints from touching too soon!

Instruction #9 - pendant2 step1
Pinterest Logo

Carefully cut around the outside of your wire bezel.

Instruction #10 - pendant2 step2
Pinterest Logo

Glue some old book page to the back of the pendant, cut to shape and cover with Liquid Glass too. Let dry thoroughly.

Instruction #11 - pendant2 step3
Pinterest Logo

Paper Beads:
Glue two old book or dictionary pages together lengthwise. Then cut into long strips that form a long drawn-out equal-sided triangle. Use a skewer to roll the paper around starting with the wide end. Fix start and end of your paper triangle strip with glue.

Instruction #12 - paperbead step1
Pinterest Logo

Apply some diluted Raw Sienna Fluid Acrylic to your beads to create an aged look. Let dry.

Instruction #13 - paperbead step2
Pinterest Logo

Cover the beads with a thin coat of Media Gloss Varnish using a soft brush. Use skewers and a sand filled pot to stick them in for drying. Don't use a heat tool as this will cause bubbles!

Instruction #14 - paperbead step3
Pinterest Logo

Cut a 6 to 7 inch piece of black wire and form a loop on one end. Insert into the paper bead.

Instruction #15 - paperbead step4
Pinterest Logo

Form the other loop, then wrap the wire around the whole bead and coil the wire around that wire end several times. Cut off any excess and make sure you bend the end of the wire inwards so it won't sting or tear any clothing.

Instruction #16 - paperbead step5
Pinterest Logo

If desired create more necklace parts using beads from taken apart cheap bracelets for example.

Instruction #17 - otherbeads
Pinterest Logo

Arrange all your necklace parts until content. Now you know how many jump rings you will need and the length of the chains needed.

Instruction #18 - assembly step1
Pinterest Logo

Get out your jewelers pliers. Prepare jump rings and closures and trim the chains needed for the necklace.

Instruction #19 - assembly step2
Pinterest Logo

Fuse all your parts (pendant, closure, beads, chains) with jump rings. Use two pliers to bend them open and close (one for holding in place, the other for bending open and close. Don't ever bend jumprings outwards to open but fix one end of the ring with one pair of pliers and bend the other end away from you to open. This way they won't break and will also close again neatly and keep their circular shape when you bend the end back in position.

Instruction #20 - aaj necklace finished 3
Pinterest Logo
Instruction #21 - aaj necklaces liquidglass finished
Pinterest Logo


Oh my giddy aunt loving your art and the tutorial ... will be trying this for sure Claudia. .Thank you for inspiring xxx

Tracy Easson

October 20, 2015

Gorgeous pieces, love the images and the paper beads, very clever. Tracy x

Tracy Evans

October 20, 2015

I haven't worked on jewelry in a few years, I'm inspired I'm going to make a necklace with tomorrow thanks for sharing. Great work like always


October 21, 2015

These are lovely. Carol xx

Carol Fox

October 22, 2015

Thank you for this tutorial! It is a beautiful work !!!!


October 24, 2015

How lovely. Wish they were mine to wear, very well done love them.

Kathy Gledsdale

October 24, 2015

What a lovely tutorial. Not only so interesting and beautiful, but u give such detailed full instructions. I appreciate it so much. I have yet to find any DecoArt on my shelves locally, but may stash away $ to order online. Thank u!

Cindy Ceroky

October 24, 2015

Thank you all so much for the wonderful feed back! I am so happy that you like this tutorial so much! Hugs! Claudia xxx


October 29, 2015

Beautiful work. I am wondering if you know what medium levels a surface like on top of a journal book. if there were two layers not the same. I hope you I am ordering some of the goodies and going to make paper beads :)


November 11, 2015

Hm. Maybe resin would do the job. Or using clear gel medium, Susan. Or tons of liquid glass. If you "build" a temporary non-stick frame to keep it in place until it has hardened, it should work just fine. x


December 2, 2015

Just love your jewellery, it is so lovely and your tutorial is so easy to follow, thanks so much!!!!!

Jasmine Patrick

January 1, 2016

How can you remove air bubbles? Would running a flame over (like with resin) w


September 12, 2016

How can you remove air bubbles? Would running a flame over (like with resin) work?


September 12, 2016

Is Liquid Glass waterproof? What's the difference between Liquid Glass & Triple Thick


December 16, 2017

I would remove airbubbles using a tooth pick while the Liquid Glass is still wet, Jen. Not sure if it will behave well under heat. @Carol, I wouldn't risk getting any jewelry in contact with water that is done from paper, no matter how well it seems to be sealed. But the Liquid Glass withstands water pretty well once it is fully cured. Hope that helps. xxx


August 29, 2019

Will liquid glass work on polymer clay?

Sarah L Taube

February 1, 2021

Leave a comment:

Join our Team

We're always looking for new creators to join our team. If you're interested, fill out our online application and read more about the features and benefits of the program. If you have any questions, shoot us an email!

Meet Our

Meet the members of our creator team and see how they've been using our products to create.